Under version 3.0 of SichboPVR, people can usually be up and watching live TV within just a few clicks after installation.

1. Dvb-t2 Driver Software
2. Dvb T2 Driver Software Download
3. Dvb-t2 Driver Software Free
4. Dvb-t2 Driver Software Update

Here's what you're going to do:

1. Launch the app and select your location

Setting your location speeds up channel scans and you'll also be helping other people in your area by doing so.

After selecting your location, you may or may not be prompted to pick a tuner/device. If you only have one tuner, scanning will begin immediately.

2. Let it scan

Depending on whether or not your region is already in the database, scanning may only take a minute or it could take a lot longer, in which case go put on a pot of coffee ☕.

If all's gone well you should be looking at your Guide screen with live TV playing.

If this happened, congrats on being one of only 1/4^th of people who manage to get it working right off the bat 👍

DVB-T/T2, DVB-S/S2 and DVB-C receivers with ASI and/or IP output, Common Interface and TS analyzer. TBS6281 DVB-T2/T Windows Driver is upgraded to V1.0.0.7. Which fixed the driver can't be installed properly from Install Pack. TBS6281 DVB-C Windows driver is upgraded to V1.0.0.7. Which fixed some small bugs. DVB-T2 Common Simulation Platform This is a MATLAB model of an end-to-end chain compliant to the DVB - T2 standard (ETSI EN 302 755 available from www.etsi.org). It was originally developed within the DVB consortium (www.dvb.org) by AICIA, BBC, Pace, Panasonic and SIDSA. Mobile DTV Viewer can be used with all DVB-T/-T2 RF receivers for which legacy BDA drivers are available. Most vendors already provide such drivers for their devices.

For the rest of you unfortunate folks, sorry. Please keep reading ...

Troubleshooting.

If no channels are found or some channels are missing

• Make sure you're using a roof antenna. Often times the little antenna that comes with a PC tuner is inadequate. If other software is able to lock channels fine, then you know it's not your antenna.
• If your first scan only took a minute, meaning you've scanned a frequency set created by others in your same area, those people might not have managed to lock all of the available frequencies. Go into Setup > (your device name) and if 'All Channels' isn't already selected, click on the existing list name and change it to All Channels instead, then put on a pot of coffee.
• If you've already scanned an 'All Channels' frequency set, try using the TV > Explorer feature to adjust your antenna by locking a frequency which you know should be valid for your region.
• Sometimes the problem can be with a poorly written tuner driver. Try find your device driver telemetry on the website and see if other people have managed to find channels using the same version that you have. You can find your driver's version info under either Setup > (your device name), or in the Windows Device Manager.

Dvb-t2 Driver Software

Using TV > Explorer to locate channels

If you're missing channels or perhaps have a gimpy indoor antenna that only works when you stand there holding it like a one-legged scarecrow, the explorer tool can help find a clearer signal or missing channels.

1. Go into TV > Explorer, select your device at the top and either select your existing frequency set, or you can grab one from the library or make a new one from scratch.

2. Hit Try Lock on a frequency that you know should be correct. If your frequency isn't listed, scroll to the end of the list and add it in.

The explorer is going to keep trying to lock the signal every 5 seconds or so. Most tuner drivers (the half decent ones anyway) will keep trying to acquire a signal whilst you fiddle with your antenna. When it locks, you should see channel preview thumbnails stream in.

3. Use the green signal metre to get the best strength you can. Again, not all drivers are well behaved, some may return 100% lock or 0% and nothing in between, other drivers are written correctly and give you fine-grained sensitivity so that you can actually test your signal.

When you have channel previews coming in simply right-click any of the channel boxes and Add all channels to > Any list you like. Or, now that you've fixed your antenna, you could hit Scan on the left to rescan all of the frequencies and it'll automatically add any new channels found into the EPG.

If there's a playback error

Check out how to resolve common decoder problems.

If you need human assistance getting set up, Sichbo Supporter members can reach me over e-mail.

RSS Feed for this tag 33 applications totalLast updated: Oct 5th 2016, 18:05 GMT

Dvb T2 Driver Software Download

Dvb-t2 Driver Software Free

Dvb-t2 Driver Software Update